 |
 |
|
|
POLSTAR
STATIC CONTROL RUBBER MAT
Static
Safe Work Area protects your sensitive products by providing
pathways to safely drain damaging static charge to ground.
Parts placed on static control rubber table mat decay their
static charge to ground at a safe rate. Body's static charge
is safely drained to ground by wearing static control footwear
while walking on static control rubber floor mat. The mats
surface resistivity allows static discharges to be quickly
dissipated. The mats are ideal for most electronics and semiconductors
applications as well as any static controlled area. |
| POLSTAR
STATIC CONTROL RUBBER MAT is for the table / floor matting with
two co-extruded layer construction; top layer is durable static
dissipative rubber and bottom layer is durable non-skid conductive
rubber. Two layers are strongly bonded to be one body. The mat
is resistant to most chemicals, such as solvents, and it is
heat-resistant to soldering iron temperature, solder fluxes.
It also resists solder flux splatters. This non-curling mat
is the most economic solution for a static safe work area. |
|
Material:
Rubber
Thickness(mm): 2 +/- 0.1, 3 +/- 0.1
Color: Green/Black, Blur/Black, Grey/Black
Hardness(KSM6518-19): Top Layer-65 ;
Bottom Layer-66
Tensile Strength(kg/cm2): Top Layer-114;
Bottom Layer-112
Elongation(%): Top Layer-370 ;
Bottom Layer-380
Surface Resistivity (ASTM-D257): Top Layer-10 7-8
ohms/square; Bottom
Layer-10 4-5 ohms/square
Static Decay 5 kv-ov: less than 0.1 second
Resistance to Ground: Less than 10 8
ohm/square
Chemical Resistance: Resistant to Solvent, Acidic, Alkali,
Oil and Aromatics ;Not Resistant to Ketone, D.O.P.
|
|
|
Top
Layer (Surface)
Size
(ThicknessxWidthxLenth) |
Green |
Blue |
Grey |
|
Gloss
finish |
Non-Reflecting
|
Gloss
finish |
Gloss
finish |
|
2mm
x 60cm x 10m |
GN2060 |
GN2060N |
BL2060 |
GY2060 |
|
2mm
x 90cm x 10m |
GN2090 |
GN2090N |
BL2090 |
GY2090 |
|
2mm
x 100cm x 10m |
GN2100 |
GN2100N |
BL2100 |
GY2100 |
|
2mm
x 120cm x 10m |
GN2120 |
GN2120N |
BL2120 |
GY2120 |
|
|
|
|
